Pet Food Aluminum Trays
Your pet food aluminum trays need to suit the portion you sell and the way you fill and close each pack. We can help you compare smooth-wall shapes, matching lids and printed exteriors for your wet dog or cat food.
Which pet food tray fits your portion?
A round cup and a rectangular tray can hold similar amounts but leave different space for filling and opening. Your target weight is a starting point; the filled sample shows where the food sits beneath the lid.
- Usable fill
- The portion and the space needed below the closure, rather than the volume filled to the very top.
- Opening and base
- Room for your filling nozzle, the food's shape and the way the pack rests on a surface.
- Single or multiple portions
- The amount you plan to sell in one pack, with storage instructions set for your recipe.
- Closed height
- The complete pack with its actual lid or overcap, including any stacking allowance.
Lids for your pet food aluminum trays
The primary seal and a removable cover do different jobs. We need to compare the tray rim with your lid material and closing method before recommending a combination.
Peelable foil or film
A heat-sealed pack needs a compatible sealing surface and lidding material. Your equipment and process settings belong in the trial, along with seal condition and opening force.
Clear overcaps
An overcap adds to the pack height and needs to engage with the rim. It does not by itself establish the sealed pack's shelf life or suitability for your process.
Board and formed lids
These use a different closure arrangement. A crimp-rim tray holds its matching board lid within the folded edge. That arrangement is not interchangeable with a peelable seal.
What does your recipe change?
Pet food aluminum trays need checking with the food you will actually pack. A smooth pate and chunks in gravy can reach the rim differently, even at the same stated fill weight.
| Your recipe | What the sample can show | What to record |
|---|---|---|
| Pate or mousse | The fill surface, food smeared onto the sealing area and space below the lid. | Target weight, fill height and a photo before closing. |
| Chunks in gravy | Liquid at the rim and pieces touching the underside of the lid. | Your normal solid-to-liquid mix and condition after handling. |
| Recipes with different fat levels | The product-contact conditions relevant to the container's coating. | Recipe information, storage conditions and the documentation your review requires. |
A sample checks one pack under the conditions tested. Changes to the recipe, lid or process may need another review.
How will your pet food trays look at home?
Your exterior artwork needs to work on the formed tray, including its corners and curved walls. Comparing the printed sample with its lid on and off shows which parts of the design remain visible.
Where will your filled packs go?
Will you sell chilled, frozen or shelf-stable pet food? Your storage conditions help us work out what the tray and lid trial needs to cover. Shelf life still needs to be validated for your recipe and process.
With filled samples, you can compare the space each closed pack takes up and look for seal or rim damage after handling. Those details matter from dispatch through to opening at home.
The empty trays you order from us
Nesting depth and inner packing affect carton space. We can discuss tray and lid quantities, bag counts and carton identification alongside your filled-pack requirements.
What do you have for your pet food tray enquiry?
A current pack, a photo or a drawing is enough to begin. If you have not chosen the lid or tray size yet, we can start with the details you do know.
Questions about your wet pet food trays
Can I use aluminum trays for wet dog or cat food?
Aluminum trays are an established format for moist pet food. For your product, the recipe, coating, lid and process still need to work together. We can review the container and closure against the sample and information you provide.
Can you confirm a tray is suitable for retort?
We would need to review the exact tray, coating and lid against your process conditions before confirming suitability. Your process validation and test evidence need to cover the complete filled pack.
Can I keep one tray shape across several recipes?
Possibly. A common shape can simplify your range. We can compare your intended portions and recipes to see whether the same container is worth taking to trial. Each recipe's fill and process still need checking.
Which documents can I request?
Let us know your destination market and the exact tray, coating and lid you are considering. We can check which documents are available for that item. Food-contact documentation is separate from approval of your pet food recipe or shelf life.
Looking for a different pet food pack?
Show us what you use now and what you would like to change. For a new range, we can begin with your portion and the way you plan to fill it.
More on your packaging choices
The FDA pet food overview covers animal-food regulation. It is not approval of a particular container. The European Aluminium Foil Association describes aluminum packaging formats used for moist pet food.